+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: Club Activities (https://rtr-pca.org/forum/forumdisplay.php?fid=24)
+--- Forum: Autocross (https://rtr-pca.org/forum/forumdisplay.php?fid=32)
+--- Thread: Suspention Rebuild (/showthread.php?tid=3176)
- Craigs*84 - 01-08-2013
Steering shaft slipped right into the u-joint.
The shaft needs to ride higher in the joint because of the rack spacers.
Jiggled and wiggled a little bit, turned the wheel lock to lock so everything can find its( new) natural resting place with no binding .
The space for the bolt is now about 1/4 to high in the joint I had to file the shaft .
That didnt take 5min....
.....Now on to the A-arms !
- Craigs*84 - 01-08-2013
Drill A couple of holes in the old rubber.....
- Craigs*84 - 01-08-2013
Grab a pry bar start and twisting.
- Craigs*84 - 01-08-2013
.
- ccm911 - 01-08-2013
Hey Craig - A real man would replace that fuel line with a gas heater going in the garage.
- Craigs*84 - 01-08-2013
mmm .. toasty...
- Vytenis - 01-08-2013
That installation looks like it could get crispy real fast!
"V"
- Craigs*84 - 01-08-2013
Its ok.....I live close to the fire house.
- Craigs*84 - 01-09-2013
Shhhh... The laundry sink makes a pretty decent parts washer in a pinch...
- Craigs*84 - 01-09-2013
....nothing going on but the cleaning and painting of the old stuff.
A good way to fill time wile waiting for another box of goodies....