+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: Tech (https://rtr-pca.org/forum/forumdisplay.php?fid=22)
+--- Forum: Ask the Tech Chair (https://rtr-pca.org/forum/forumdisplay.php?fid=34)
+--- Thread: wiring near air intake for '03 Carrera (/showthread.php?tid=2083)
- dkjporsche - 01-24-2010
Wiring near/at air intake for '03 Carrera detached. Wiring appears in Y shape. One part of wiring attached to intake, other part dangling. Please advise.
- Larry Herman - 01-24-2010
Is this on the tube between the filter box and the air flow meter? A picture would help.
- dkjporsche - 01-25-2010
Thanks for reply Larry,
I have to give you some details first.
I replaced my filter with a K&N cold air intake. I changed out my intake system three different times, different cars. I do not remember if wire should be detached.
I recently had ignition coils replaced, all six. Oil separator replaced as well. Car was leaking coolant big time.. Since repair, engine light has come on. I decided to investigate for loose filter and found wire detached. So, wire isn't in place as originally installed as stock.
I can explain description of wire as; Y shape. One side attached to air intake housing or throttle body, upper right corner. Plug is sort of flat. Other side of Y shape wire is detached. It has plug that is able to grip with fingers to connect and unplug. I'm not able to provide pics as of yet. I hope description helps. I haven't contacted repair facility as I am hoping to fix on my own. Hope you are able to help with advice..