Riesentöter Forums
Battery Hold-Down - Printable Version

+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: Model-Specific (https://rtr-pca.org/forum/forumdisplay.php?fid=23)
+--- Forum: 911 Air-Cooled (https://rtr-pca.org/forum/forumdisplay.php?fid=38)
+--- Thread: Battery Hold-Down (/showthread.php?tid=2688)



- JoeP - 04-16-2011

I was unhappy with the battery hold-down in my car and just upgraded to a more secure design normally used in performance boats:

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=442499&catalogId=10001&langId=-1&storeId=11151&storeNum=10109&subdeptNum=10548&classNum=10551

It is one helluva piece.  The bottom tray and top retaining clamp are very heavy plastic.  The long screws and nuts are stainless.  The bottom tray attaches to the car using four, user-supplied 1/4" cap screws.  I added aluminum straps between each pair of screws to provide more holding strength through the car's sheet metal than plastic alone.  I'm sure this is overkill.  The plastic appears stronger than my battery case.  (I have no affiliation with the vendor.  I just like this particular part.)




- Dan Yonker - 01-04-2012

d