+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: General Discussion (https://rtr-pca.org/forum/forumdisplay.php?fid=25)
+--- Forum: Porsche-Related Discussion (https://rtr-pca.org/forum/forumdisplay.php?fid=48)
+--- Thread: aluminum welding for oil cooler/ any good shops? (/showthread.php?tid=2971)
- 914dave - 12-02-2011
I have 2 oil coolers that need fittings welded on them for a 914-6 conversion. I'm looking for a competent shop to weld, clean and pressure test them. I'm in the Willow Grove area but am willing to travel for a good shop. Who have you had good expriences with?
Thanks
Dave Toppin
215.932.2463
- dmano - 12-08-2011
Performance Chassis in Pottstown/Limerick talk to Doug or Jim. They do the best welding in the area and trust them completely.
- 914dave - 12-08-2011
Thanks for the info. I ended up using S & W race cars in spring City
- dmano - 12-08-2011
Slippery and Wobbly are good but P/C is really good. They build the best roll cages on the East Coast.
- TwentySix - 12-09-2011
dmano wrote:
Quote:Slippery and Wobbly are good but P/C is really good. They build the best roll cages on the East Coast.
I'd say that honor goes to Piper Motorsports
http://www.pipermotorsport.com/services.asp
- dmano - 12-09-2011
Sorry but Piper is not even close to the work they do at Perfromance Chassis. I have been in the racing world my whole life and have seen a lot of cages and chassis being built and P/C has the cleanest and most innovative work I have seen/used to date. They will build anything that has to do with metal.