+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: Club Activities (https://rtr-pca.org/forum/forumdisplay.php?fid=24)
+--- Forum: Autocross (https://rtr-pca.org/forum/forumdisplay.php?fid=32)
+--- Thread: Suspention Rebuild (/showthread.php?tid=3176)
- Craigs*84 - 12-29-2012
Well ...its time to stop stalling . The wrenches start turning tonight !
- Craigs*84 - 12-29-2012
22-mm front 29-mm rear torsion bars.
22-mm front 21-mm factory swaybars.
- Craigs*84 - 12-29-2012
Torbo tierods, ball joints, Bilstine HD's and Sport's....
- Craigs*84 - 12-29-2012
...RSR jewelry... err bushings.
- Craigs*84 - 12-29-2012
.
- Craigs*84 - 12-29-2012
.
- Craigs*84 - 12-29-2012
Upper strut bushings, swing arm bushings,
fuel pump, brake lines, 86 944 turbo wheels, and a bunch of other stuff .
Ill try to keep the updates coming.
"V", Nick , Stephane , and other do it yourselfers stay close to the HELP LINE .
- trevornaidoo - 12-29-2012
Awesome! Good luck with the winter projects. Can't wait to see the car go with all the new stuff.
- betegh9 - 12-31-2012
Nice Craig!
I bought stuff from Rebel Racing as well for my long 914 project.When doing your suspension, set the european ride height, raise your steering rack and add a bum steer kit while you are installing turbo tie rods.
Are your sway bars adjustable?
- betegh9 - 12-31-2012
Now that you spent over $2000.00 for all those go-fast goodies, I hope that you have enough $$$ to get some decent tires. You will also need to spend a few hundred $$$on a good alignment AFTER YOU HAVE SELECTED THE PROPER TIRE.
This is free advise, but you don't have to take it......... any more, will cost you
and anyway, I don't want to give away all my secrets that took 20+ years to acquire...... I may wind up loosing to you in the next AX event.You will have to submit a new PPF form to the AX governing body.
:dude: