+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: Tech (https://rtr-pca.org/forum/forumdisplay.php?fid=22)
+--- Forum: Ask the Tech Chair (https://rtr-pca.org/forum/forumdisplay.php?fid=34)
+--- Thread: Clutch (/showthread.php?tid=3349)
Clutch - weapon x - 02-26-2013
Need torque specs for clutch install on 2002 996 turbo. Thanks for the help Jarad. Installing Sachs stage 2.5 clutch w/ factory flywheel.
RE: Clutch - Larry Herman - 02-26-2013
It is the same as other M64 case motors. The torque is 90 NM (66 ft lbs). Although they are not stretch bolts (use once & discard), it would not be a bad idea to replace them seeing as how they are 13 years old.
RE: Clutch - Larry Herman - 02-26-2013
That was for the flywheel to crankshaft. If you meant the pressure plate to the flywheel, that is 23 NM (17 ft lbs).
RE: Clutch - weapon x - 02-28-2013
Yes pressure plate to flywheel. Thanks for info.
RE: Clutch - weapon x - 03-04-2013
Did clutch Friday night. Thanks for helpful info.