Standings - Printable Version +- Riesentöter Forums (https://rtr-pca.org/forum) +-- Forum: Club Activities (https://rtr-pca.org/forum/forumdisplay.php?fid=24) +--- Forum: Autocross (https://rtr-pca.org/forum/forumdisplay.php?fid=32) +--- Thread: Standings (/showthread.php?tid=3443) |
RE: Standings - betegh9 - 08-02-2013 Doing PPF for every entrant at the charity event would be too time confusing, so we will use the same rules as done at the last P and P event. We regulars can still use our system to figure points, etc. See you at the Iron Pigs!! RE: Standings - SomebodyDial911 - 08-02-2013 Roger that. I was referring to the PPF scores for the general championship series. RE: Standings - trevornaidoo - 08-02-2013 (08-02-2013, 07:16 PM)SomebodyDial911 Wrote: Bump -Dan, let me know what inputs your need for the ppf calc. I would be happy to send you mine. RE: Standings - NumeroUnoPA - 08-08-2013 Thanks to Dan for volunteering. I have been distracted between PfP and the accident (Still in hospital). It is a great help. All autocross participants need to get their infomation to Dan quickly so we can issue standings. RE: Standings - trevornaidoo - 08-08-2013 Dave, so sorry to hear about the accident. Hope you make a speedy recovery. We missed you on sunday and hope to see you AX'ing soon. RE: Standings - BBrandis - 08-08-2013 Where is the link for the PFP so I can download it to input my information? Dave, I hope you make a speedy recovery and that you are feeling better soon. RE: Standings - SomebodyDial911 - 08-18-2013 If you can just sent me a PM with your stats in the following format (pasted below; word version attached), I can input them into the excel workbook to calculate your PPFs. Only have stats from a couple of people at this point. Name: ______________________ Car Type: Year: ______________________ (e.g. 2005) Model: ______________________ (e.g. Carrera) Engine: ______________________ (e.g. 3.6L) Modifications Weight: ______________________ (e.g. factory -120 lbs) HP: ______________________ (e.g. 345 HP, including mods) Height: ______________________ (e.g. factory –1.5”) Front Springs (torsion bar diameter in mm or coil spring rate in lbs/in): __________________ Rear Springs: (torsion bar diameter in mm or coil spring rate in lbs/in): __________________ Front Camber: ______________________ (e.g. -0.3°) Rear Camber: ______________________ (e.g. -1.2°) Front Wheel Width: ______________________ (e.g. 9.5”) Rear Wheel Width: ______________________ (e.g. 11.5”) Front Tire Section Width: ______________________ (e.g. 235) Front Tire Aspect Ratio: ______________________ (e.g. 35) Front Wheel/Tire Diameter: ______________________ (e.g. 19”) Rear Tire Section Width: ______________________ (e.g. 305) Rear Tire Aspect Ratio: ______________________ (e.g. 30) Rear Wheel/Tire Diameter: ______________________ (e.g. 19”) Tire UTQG Tread Wear Rating: ______________________ (e.g. 220) Modified Gears?: ______________________ (Y/N) Modified Bushings?: ______________________ (Y/N) Roll Cage?: ______________________ (Y/N) Modified Brakes?: ______________________ (Y/N) Thanks much, Daniel RE: Standings - betegh9 - 08-18-2013 Please state who's stats you have and who's you don't Nick RE: Standings - Craigs*84 - 08-18-2013 Dan, I just sent my ppf. I just typed it out it doesn't look like you can attach files to PM's. RE: Standings - betegh9 - 08-18-2013 Use regular email. Dan posted his address......now we can send him lots is spam. |