04-03-2007, 11:39 PM
Sorry dude, I forgot to give you the spec.
Spec for a fully charged system is 12.6v, minimum is 12.0v that is for the battery.
To do a battery load test, apply 200amp load for 15 seconds. For this time of year (temperature) figure a passing reading would be 9.3-9.5v.
All this information can be found in section 270 of the Bentley Manual.
Again good luck
Spec for a fully charged system is 12.6v, minimum is 12.0v that is for the battery.
To do a battery load test, apply 200amp load for 15 seconds. For this time of year (temperature) figure a passing reading would be 9.3-9.5v.
All this information can be found in section 270 of the Bentley Manual.
Again good luck
mike
89 Carrera
#402
89 Carrera
#402