Suspention Rebuild - Printable Version +- Riesentöter Forums (https://rtr-pca.org/forum) +-- Forum: Club Activities (https://rtr-pca.org/forum/forumdisplay.php?fid=24) +--- Forum: Autocross (https://rtr-pca.org/forum/forumdisplay.php?fid=32) +--- Thread: Suspention Rebuild (/showthread.php?tid=3176) |
- Craigs*84 - 01-24-2013 I hate bushings ..........................................Im buying a Dremel Tool.. - betegh9 - 01-24-2013 What's a Dremel? Sounds like the name of a hamster. Don't be afraid of using some elbow grease and grunt!! - Craigs*84 - 01-25-2013 The saga continues.. While the arms are out I have access to my jacked up swaybar mount. At sometime the left mount ripped off, and instead of replacing the whole thing, A flat plate was welded to what was left of the mount . That's A problem when its supposed to cradle the sway bar. Time to cut both mounts off and replace with stronger units. Left side... - Craigs*84 - 01-25-2013 Right side.... - Craigs*84 - 01-25-2013 Time to let the sparks fly..... - Craigs*84 - 01-25-2013 I mean some real sparks !...hock: Being careful not to cut to deep... - Craigs*84 - 01-25-2013 Trying to cut the weld and or the mount .. Not the body! Take a look and start pealing it back like a sardine can... - Craigs*84 - 01-25-2013 Eventually you have this.... The last bit is the hardest part to do Its just not enough room to work but it can be done... - Craigs*84 - 01-25-2013 All done .... just needs a little clean up with the grinder and its good to go... Left side took about 2hrs figuring out what to do and trying not to screw anything up The right side 30 min... - Craigs*84 - 01-25-2013 Right side.... |