+- Riesentöter Forums (https://rtr-pca.org/forum)
+-- Forum: Tech (https://rtr-pca.org/forum/forumdisplay.php?fid=22)
+--- Forum: Ask the Tech Chair (https://rtr-pca.org/forum/forumdisplay.php?fid=34)
+--- Thread: 88-911-M491 (/showthread.php?tid=1654)
- M491 - 04-23-2009
I installed a new high-low beam/ turn signal control unit and I forgot to take a picture of the wiring connections in the column prior to disassembly. It's been a while since I disassembled the unit and I am left with two BROWN colored wires in the column which need to be connected prior to re-installing the upper and lower column trim, the wheel/horn mounting assy. and the wheel. One has a slip on connection which I am assuming goes to the horn contact and the other has a connector ring attached for a screw mounting, which I can't seem to find an appropriate connection point for.
It's late, the weather is getting warm and the car needs to runnnnnnnnnnn.- michael lang - 04-24-2009
Michael, when I get home tonight I can send you a pdf file of the schematic. Please send me your email address.
- M491 - 04-24-2009
Thanks for the response!! Late into the night I figured out the connection however I would appreciate the electrical information for my records. My e-mail address is:
mdbroderick@verizon.net
The car and I are happy again!!!!.
- michael lang - 04-24-2009
it's on its way. it's a pretty big file so it will take a little while to load.