I am getting some pressure from higher ups to move in to a Pcar for the track so I am putting the BMW Race Car up for sale. Many of you know the car and know that it is setup and does quite well with keeping up with the Pcars on the track. It is still able to be inspected and is able to be driven to and from the track.
Some Basics
1999 BMW M3
~ 93K MILES
TC Kline Double Adjustable Coilovers
550 lb front and 600 lb rear springs
Racing Dynamics Front Sway Bar
Full Mono Ball Suspension ( except for rear inner upper control arms for BMW CCA racing used groupe N mount)
TC Kline Monoball Front Camber Plates
TC Kline Monoball Rear Trailing Arm Bushings
TC Kline Monoball Rear Upper Strut Mounts
Monoball Rear Control Arm Bushings
Ground Control Monoball Adjustable Lower Control Arms
Rogue Engineering Upper Strut Brace
Aluminum Front Control Arms w/ delrin bushing
New Front and Rear Wheel Bearings
Solid Motor / Trans Mounts
Brake Cooling Ducts
External Oil Cooler
Sunbelt Cams
Upgraded Vanos Unit with REM Polished Thrust Plates
M50 Intake Manifold
993 MAF
3" Coldair intake
24# Fuel Injectors
Custom Software
Kromer Kraft Custom Headers and Exhaust
Zionsville Racing Aluminum Radiator
Light Weight Pulleys
BMW Z3 Close Ratio Steering Rack
Sparco Pro 2000 Seat
Team Tech Harness'
DAS Sport Roll Bar
Spare Bumper
Spare Front Splitter
Extra Set of wheels for slicks
Lots more...
The Car is prob putting out over 300hp at the crank
Asking 18k obo
Send me an email if interested
Erik
Some Basics
1999 BMW M3
~ 93K MILES
TC Kline Double Adjustable Coilovers
550 lb front and 600 lb rear springs
Racing Dynamics Front Sway Bar
Full Mono Ball Suspension ( except for rear inner upper control arms for BMW CCA racing used groupe N mount)
TC Kline Monoball Front Camber Plates
TC Kline Monoball Rear Trailing Arm Bushings
TC Kline Monoball Rear Upper Strut Mounts
Monoball Rear Control Arm Bushings
Ground Control Monoball Adjustable Lower Control Arms
Rogue Engineering Upper Strut Brace
Aluminum Front Control Arms w/ delrin bushing
New Front and Rear Wheel Bearings
Solid Motor / Trans Mounts
Brake Cooling Ducts
External Oil Cooler
Sunbelt Cams
Upgraded Vanos Unit with REM Polished Thrust Plates
M50 Intake Manifold
993 MAF
3" Coldair intake
24# Fuel Injectors
Custom Software
Kromer Kraft Custom Headers and Exhaust
Zionsville Racing Aluminum Radiator
Light Weight Pulleys
BMW Z3 Close Ratio Steering Rack
Sparco Pro 2000 Seat
Team Tech Harness'
DAS Sport Roll Bar
Spare Bumper
Spare Front Splitter
Extra Set of wheels for slicks
Lots more...
The Car is prob putting out over 300hp at the crank
Asking 18k obo
Send me an email if interested
Erik