07-13-2007, 06:11 AM
Phokaioglaukos wrote:
I think the hybrid ones are the way to go. I had to unhook my stock mounts while doing my coolant bottle, and its easy, you put a jack under the rear of the motor, remove the 2 19mm nuts from the bottom of the mount, lower the motor with the jack, and remove the 2 bolts from then engine compartment that hold each mount. Easy job.
The vibration/load has to go somewhere when you do this, but it has to be better than the motor wiggling around. I think the GT3 has stiffer mounts already, I'll have to look on the PET.
Quote:Which would you do? Solid mounts or tehh Wevos, which seem to be between and betwixt solid and rubber?
I think the hybrid ones are the way to go. I had to unhook my stock mounts while doing my coolant bottle, and its easy, you put a jack under the rear of the motor, remove the 2 19mm nuts from the bottom of the mount, lower the motor with the jack, and remove the 2 bolts from then engine compartment that hold each mount. Easy job.
The vibration/load has to go somewhere when you do this, but it has to be better than the motor wiggling around. I think the GT3 has stiffer mounts already, I'll have to look on the PET.