87 911 service in Reading, PA

[dennis in se pa]

    I am looking for a new indie wrench near Reading, PA. John Flannery said he was closing his shop at the end of January. Any suggestions?

[smankow]

make sure that you check in der gasser.  Several shops advertise within our newsletter and it's always good to support those who support us whenever possible.

Steve

[Tony356993]

Dennis,

What kind of work do you need done?

[Terry]

Bill Boys just opened up Possum Hollow in Phoenixville. You're in luck!

[ccm911]

Apparently, Bill Boyce(sp?) comes highly recommended.  His Business is called "Possum Hollow".  Yuck. Yuck.

[onebad911]

CB FOREIGN CARS  in maxatawney, outside of kutztown a friend of mine takes his there they are very familiar with the old school as weel as the new cars----from what he says they only charge 45 dollars an hour labor-----very reasonable

[356D]

onebad911 wrote:

CB FOREIGN CARS in maxatawney, outside of kutztown a friend of mine takes his there they are very familiar with the old school as weel as the new cars----from what he says they only charge 45 dollars an hour labor-----very reasonable

This is who I use also. He's very good. There's also a good used lot down the street from him in Monterey owned by Gary Phillips. He does a lot of work on many types of foreign cars as well, but mostly to sell them or for customers who've bought from him but CB is good.

[dennis in se pa]

Thanks for the responses guys. These places sound good but they are pretty far away. Does anybody know anything about Jim Smith who owns Exeter Automotive? I came across them yesterday. I live on the east side of Reading.

[onebad911]

sorry Dennis, i live in exeter and never heard of him.

[michael lang]

dennis, I don't know these people since I am in Frederick, MD but these are the people that worked on my car before I got it.

Performance Automotive, Inc. 3239 Phoenixville Pike Bldg 1 Ste 1 Malvern PA 19355 610.695.9545. This is where my car was worked on before I got. The guy I bought my car from lived just outside Reading and took both my 911 & his 965 there to be worked on.  My suggestion, call them and see if they are what you are looking for. There's always DIY!