06-24-2008, 01:31 AM
You didn't indicate if they are cross-drilled and you didn't say what the measurement was. George has a good point about them in regards to vibration under braking. I wouldn't worry too much about the cracking unless there were a large number of cracks and they connected the holes if your brake rotors are cross-drilled or there was a vibration in brake pedal under braking which would indicate the rotors are under spec and are now warping. Good news is that unlike your windshield, brake rotors are real cheap.
mike
89 Carrera
#402
89 Carrera
#402