07-16-2009, 08:55 AM
Todd,
If the stock rears fit then you can just leave the spacers in place.
I ran 10 inch RUF wheels on the back of my wide body Carrera for a while and they required different (narrower) spacers. They used lugs nuts so I didn't have to worry about that as the stock studs and lug nuts worked with either wheel. All I had to do was to make sure the spacers were with the wheels and I was ok. In reality, that wasn't that hard to do but.......
If the stock rears fit then you can just leave the spacers in place.
I ran 10 inch RUF wheels on the back of my wide body Carrera for a while and they required different (narrower) spacers. They used lugs nuts so I didn't have to worry about that as the stock studs and lug nuts worked with either wheel. All I had to do was to make sure the spacers were with the wheels and I was ok. In reality, that wasn't that hard to do but.......
Michael Andrews