08-18-2013, 07:25 PM
If you can just sent me a PM with your stats in the following format (pasted below; word version attached), I can input them into the excel workbook to calculate your PPFs. Only have stats from a couple of people at this point.
Name: ______________________
Car Type:
Year: ______________________ (e.g. 2005)
Model: ______________________ (e.g. Carrera)
Engine: ______________________ (e.g. 3.6L)
Modifications
Weight: ______________________ (e.g. factory -120 lbs)
HP: ______________________ (e.g. 345 HP, including mods)
Height: ______________________ (e.g. factory –1.5”)
Front Springs (torsion bar diameter in mm or coil spring rate in lbs/in): __________________
Rear Springs: (torsion bar diameter in mm or coil spring rate in lbs/in): __________________
Front Camber: ______________________ (e.g. -0.3°)
Rear Camber: ______________________ (e.g. -1.2°)
Front Wheel Width: ______________________ (e.g. 9.5”)
Rear Wheel Width: ______________________ (e.g. 11.5”)
Front Tire Section Width: ______________________ (e.g. 235)
Front Tire Aspect Ratio: ______________________ (e.g. 35)
Front Wheel/Tire Diameter: ______________________ (e.g. 19”)
Rear Tire Section Width: ______________________ (e.g. 305)
Rear Tire Aspect Ratio: ______________________ (e.g. 30)
Rear Wheel/Tire Diameter: ______________________ (e.g. 19”)
Tire UTQG Tread Wear Rating: ______________________ (e.g. 220)
Modified Gears?: ______________________ (Y/N)
Modified Bushings?: ______________________ (Y/N)
Roll Cage?: ______________________ (Y/N)
Modified Brakes?: ______________________ (Y/N)
Thanks much,
Daniel
Name: ______________________
Car Type:
Year: ______________________ (e.g. 2005)
Model: ______________________ (e.g. Carrera)
Engine: ______________________ (e.g. 3.6L)
Modifications
Weight: ______________________ (e.g. factory -120 lbs)
HP: ______________________ (e.g. 345 HP, including mods)
Height: ______________________ (e.g. factory –1.5”)
Front Springs (torsion bar diameter in mm or coil spring rate in lbs/in): __________________
Rear Springs: (torsion bar diameter in mm or coil spring rate in lbs/in): __________________
Front Camber: ______________________ (e.g. -0.3°)
Rear Camber: ______________________ (e.g. -1.2°)
Front Wheel Width: ______________________ (e.g. 9.5”)
Rear Wheel Width: ______________________ (e.g. 11.5”)
Front Tire Section Width: ______________________ (e.g. 235)
Front Tire Aspect Ratio: ______________________ (e.g. 35)
Front Wheel/Tire Diameter: ______________________ (e.g. 19”)
Rear Tire Section Width: ______________________ (e.g. 305)
Rear Tire Aspect Ratio: ______________________ (e.g. 30)
Rear Wheel/Tire Diameter: ______________________ (e.g. 19”)
Tire UTQG Tread Wear Rating: ______________________ (e.g. 220)
Modified Gears?: ______________________ (Y/N)
Modified Bushings?: ______________________ (Y/N)
Roll Cage?: ______________________ (Y/N)
Modified Brakes?: ______________________ (Y/N)
Thanks much,
Daniel
2010 997 C2