01-24-2010, 12:43 PM
Wiring near/at air intake for '03 Carrera detached. Wiring appears in Y shape. One part of wiring attached to intake, other part dangling. Please advise.
wiring near air intake for '03 Carrera
|
01-24-2010, 12:43 PM
Wiring near/at air intake for '03 Carrera detached. Wiring appears in Y shape. One part of wiring attached to intake, other part dangling. Please advise.
01-24-2010, 05:51 PM
Is this on the tube between the filter box and the air flow meter? A picture would help.
Larry Herman
2006 Cayenne S 2010 Allegro RED 38QBA Nationally Certified PCA Instructor Past Flames: 1994 RS America Club Racer 2004 GT3 Track Car 1984 911 Carrera Club Racer 1974 914/4 2.0 Track Car
01-25-2010, 01:12 PM
(This post was last modified: 01-25-2010, 01:24 PM by dkjporsche.)
Thanks for reply Larry,
I have to give you some details first. I replaced my filter with a K&N cold air intake. I changed out my intake system three different times, different cars. I do not remember if wire should be detached. I recently had ignition coils replaced, all six. Oil separator replaced as well. Car was leaking coolant big time.. Since repair, engine light has come on. I decided to investigate for loose filter and found wire detached. So, wire isn't in place as originally installed as stock. I can explain description of wire as; Y shape. One side attached to air intake housing or throttle body, upper right corner. Plug is sort of flat. Other side of Y shape wire is detached. It has plug that is able to grip with fingers to connect and unplug. I'm not able to provide pics as of yet. I hope description helps. I haven't contacted repair facility as I am hoping to fix on my own. Hope you are able to help with advice.. |
« Next Oldest | Next Newest »
|
© Riesentöter Region, Porsche Club of America, Inc. - All Rights Reserved