07-22-2014, 01:29 PM
See that metal that is alongside the wires? That is the spring clip that holds the sensor in place. I usually use a pair of needle nose pliers to pinch both sides inwards, and then the sensor should pop right out. But a lot of times, they get really stuck in there, and you have to break them to remove.
And yes, these are made to be replaced. They look like standard issue items, and should cost about $25 each.
And yes, these are made to be replaced. They look like standard issue items, and should cost about $25 each.
Christopher Mahalick
1984 911 Targa
2001 BMW 530i
1974 Lotus Europa
1994 Ducati 900SS/SP
197(?)Suzuki GT-750 Street fighter
1965 Suzuki Hillbilly
1983 Suzuki GS-1100ES
2006 Kawasaki Ninja 250
1984 911 Targa
2001 BMW 530i
1974 Lotus Europa
1994 Ducati 900SS/SP
197(?)Suzuki GT-750 Street fighter
1965 Suzuki Hillbilly
1983 Suzuki GS-1100ES
2006 Kawasaki Ninja 250