Suspention Rebuild

[Craigs*84]

Steering shaft slipped right into the u-joint.

The shaft needs to ride higher in the joint because of the rack spacers.

Jiggled and wiggled a little bit, turned the wheel lock to lock so everything can find its( new) natural resting place with no binding .

        
 The space for the bolt is now about 1/4  to high in the joint  I had to file the shaft .
That didnt take 5min....

.....Now on to the A-arms !

[Craigs*84]

 Drill A couple of holes in the old rubber.....

 

[Craigs*84]

Grab a pry bar start and twisting.

[Craigs*84]

.

[ccm911]

Hey Craig - A real man would replace that fuel line with a gas heater going in the garage.

[Craigs*84]

mmm .. toasty...

[Vytenis]

That installation looks like it could get crispy real fast!

"V"

[Craigs*84]

Its ok.....I live close to the fire house.

[Craigs*84]

Shhhh... The laundry sink makes a pretty decent parts washer in a pinch...

[Craigs*84]

....nothing going on but the  cleaning and painting of the old stuff.

 A good way to fill time wile waiting for another box of goodies....