03-19-2016, 11:56 PM
(03-19-2016, 02:42 PM)LouZ Wrote:(03-19-2016, 02:00 PM)mwestboxster Wrote: I confirmed the Home Depot 3 miles from me rents pallet jacks (more like a pallet jack) but they have them. Thanks 981S, no way I ever would have thought of that. Next question I have: I measured the distance from the wall to appox where the car would be on the lift and I have about 25". It's the same on both sides of my garage. Any idea if that would pose a problem?
If you are referring to the sides, then it is plenty since the lift is less than the width of the wheels.
If you are concerned about the length from the front bumper to the wall, it is also ok! The power pack is connected by hoses so the 25" space it plenty of room, since it is less than 1'.
What I'm referring to is the appox distance from the wall to where the car would be. I'd have appox 2' between the wall and the wheels. I measured the distance from the fenders front / rear to the garage wall. The car on the lift would be positioned about where it is now. I'd have about 2' on the pass side to remove wheels & work on brakes. I am wondering if anyone else is working in a similar tight space & is it a problem working in that limited space: